Product drawings
Connection size
Worm gear torque
design basis
1. The design of the valve shall comply with Q/320506 FDV01-20132: GB/T 12224-2005 "General Requirements for Steel Valves"
2. GB/T 12220-1989 "General Valve Marking"
3. GB/T 12223-2005 "Connection of Partial Rotary Valve Drive Devices"
4. JB/T 12006-2014 "Welded Ball Valves for Steel Pipes"
5. GB/T 37827-2019 "Welded Ball Valves for Urban Heating"
Product Parts List
Prev:Fully welded full bore ball valve Q367HF-16/25C CF8 fixed ball bipolar turbine anti-corrosion paint
Next:Fully welded full bore ball valve Q361HF-16/25C 304 single pole worm gear anti-corrosion paint
Related Information
High pressure flange fully welded fixed ball valve Q347HF-300LB-1500LB
Directly buried single discharge ball valve MQ361HF-25 CF8 ball
Fully welded ball valve Q61HF-16/40C CF8 ball reduced diameter forged ball valve with movable handle
Q61HF-20K CF8 fully welded reduced diameter ball valve with movable handle KIS standard
If you have any questions or suggestions about the product, or if you want to know more, you can contact us at any time.
Product Center
Export department